Backup por SSH

http://www.nongnu.org/rdiff-backup/examples.html

rdiff-backup examples

Sections

• Backing up
• Restoring
• Deleting older files
• File selection with include/exclude options
• Getting information about the backup directory
• Miscellaneous other commands

• Simplest case---backup local directory foo to local directory bar. bar will end up a copy of foo, except it will contain the directory foo/rdiff-backup-data, which will allow rdiff-backup to restore previous states.

  rdiff-backup foo bar

   

• Simple remote case---backup directory /some/local-dir to the directory /whatever/remote-dir on the machine hostname.net. It uses ssh to open the necessary pipe to the remote copy of rdiff-backup. Just like the above except one directory is on a remote computer.

  rdiff-backup /some/local-dir hostname.net::/whatever/remote-dir

   

• This time the source directory is remote and the destination is local. Also, we have specified the username on the remote host (by default ssh will attempt to log you in with the same username you have on the local host).

  rdiff-backup [e-mail]::/remote-dir local-dir

   

• It is even possible for both the source and destination directories to be on other machines. Below we have also added the -v5 switch for greater verbosity (verbosity settings go from 0 to 9, with 3 as the default), and the --print-statistics switch so some statistics will be displayed at the end (even without this switch, the statistics will still be saved in the rdiff-backup-data directory).

  rdiff-backup -v5 --print-statistics user1@host1::/source-dir user2@host2::/dest-dir

   

• Suppose earlier we have run rdiff-backup foo bar, with both foo and bar local. We accidentally deleted foo/dir and now want to restore it from bar/dir.

  cp -a bar/dir foo/dir

  That’s right, since rdiff-backup makes a mirror, we can retrieve files using standard commands like cp.

   

• For the rest of the examples in the section, we will assume that the user has backed up with the command rdiff-backup local-dir host.net::/remote-dir. Of course, in all these examples it would be equally possible to have the source being remote and the backup directory local.

  In this case we can’t use cp to copying host.net::remote-dir/file to local-dir/file because they are on different machines. We can get rdiff-backup to restore the current version of that file using either of these::

  rdiff-backup --restore-as-of now host.net::/remote-dir/file local-dir/file
rdiff-backup -r now host.net::/remote-dir/file local-dir/file

  The --restore-as-of (or -r for short) switch tells rdiff-backup to restore instead of back up, and the now option indicates the current time.

   

• But the main advantage of rdiff-backup is that it keeps version history. This command restores host.net::/remote-dir/file as it was 10 days ago into a new location /tmp/file.

  rdiff-backup -r 10D host.net::/remote-dir/file /tmp/file

  Other acceptable time strings include 5m4s (5 minutes and 4 seconds) and 2002-03-05 (March 5th, 2002). For more information, see the TIME FORMATS section of the manual page.

   

• Finally, we can use rdiff-backup to restore directory from an increment file. Increment files are stored in host.net::/remote-dir/rdiff-backup-data/increments and hold the previous versions of changed files. If you specify one directly:

  rdiff-backup host.net::/remote-dir/rdiff-backup-data/increments/file.2003-03-05T12:21:41-07:00.diff.gz local-dir/file

  rdiff-backup will tell from the filename that it is an rdiff-backup increment file and thus enter restore mode. Above the restored version is written to local-dir/file.

   

Although rdiff-backup tries to save space by only storing file differences, eventually space may run out in the destination directory. rdiff-backup’s --remove-older-than mode can be used to delete older increments.

This section assumes that rdiff-backup has been used in the past to back up to host.net::/remote-dir, but all commands would work locally too, if the hostname were ommitted.

• This commands deletes all information concerning file versions which have not been current for 2 weeks:

  rdiff-backup --remove-older-than 2W host.net::/remote-dir

  Note that an existing file which hasn’t changed for a year will still be preserved. But a file which was deleted 15 days ago cannot be restored after this command is run.

   

• As when restoring, there are a variety of ways to specify the time. The 20B below tells rdiff-backup to only preserve information from the last 20 rdiff-backup sessions. (nnB syntax is only available in versions after 0.13.1.)

  rdiff-backup --remove-older-than 20B host.net::/remote-dir

   

Sometimes you don’t want to back up all files. The various --include and --exclude options can be used to select exactly which files to back up. See the man page for a list of all the options and their definitions.

• In this example we exclude /mnt/backup to avoid an infinite loop.

  rdiff-backup --exclude /mnt/backup / /mnt/backup

  (Actually rdiff-backup can automatically detect simple loops like the one above.) This is just an example, in reality it would be important to exclude /proc as well.

   

• This example is more realistic. We have excluded /proc, /tmp, and /mnt. /proc in particular should never be backed up. Also, the source directory happens to be remote.

  rdiff-backup --exclude /tmp --exclude /mnt --exclude /proc [e-mail]::/ /backup/host.net

   

• Multiple include and exclude options take precedence in the order they are given. The following command would back up /usr/local/bin but not /usr/bin.

  rdiff-backup --include /usr/local --exclude /usr / host.net::/backup

   

• rdiff-backup uses rsync-like wildcards, where ** matches any path and * matches any path without a / in it. Thus this command:

  rdiff-backup --include /usr/local --include /var --exclude ’**’ / /backup

  backs up only the /usr/local and /var directories. The single quotes ’’ are not part of rdiff-backup and are only used because many shells will expand **.

   

• Here is a more complicated example:

  rdiff-backup --include ’**txt’ --exclude /usr/local/games --include /usr/local --exclude /usr --exclude /backup --exclude /proc / /backup

  The above command will back up any file ending in txt, even /usr/local/games/pong/scores.txt because that include has highest precedence. The contents of the directory /usr/local/bin will get backed up, but not /usr/share or /usr/local/games/pong.

   

• rdiff-backup can also accept a list of files to be backed up. If the file include-list contains these two lines:

  /var
  /usr/bin/gzip
  

  Then this command:

  rdiff-backup --include-filelist include-list --exclude ’**’ / /backup

  would only back up the files /var, /usr, /usr/bin, and /usr/bin/gzip, but not /var/log or /usr/bin/gunzip. Note that this differs from the --include option, since --include /var would also match /var/log.

   

• The same file list can both include and exclude files. If we create a file called include-list that contains these lines:

  **txt
  - /usr/local/games
  /usr/local
  - /usr
  - /backup
  - /proc

  Then the following command will do exactly the same thing as the complicated example two above.

  rdiff-backup --include-globbing-filelist include-list / /backup

  Above we have used --include-globbing-filelist instead of --include-filelist so that the lines would be interpreted as if they were specified on the command line. Otherwise, for instance, **txt would be considered the name of a file, not a globbing string.

   

The following examples assume that you have run rdiff-backup in-dir out-dir in the past.

• This command finds all new or old files which contain the string frobniz.

  find out-dir -name ’*frobniz*’

  rdiff-backup doesn’t obscure the names of files at all, so often using traditional tools work well.

   

• Either of these equivalent commands lists the times of the available versions of the file out-dir/file. It may be useful if you need to restore an older version of in-dir/file but aren’t sure which one.

  rdiff-backup --list-increments out-dir/file
rdiff-backup -l out-dir/file

   

• The following command lists all the files under out-dir/subdir which has changed in the last 5 days.

  rdiff-backup --list-changed-since 5D out-dir/subdir

   

• This command lists all the files that were present in out-dir/subdir 5 days ago. This includes files that have not changed recently as well as those that have been deleted in the last 5 days.

  rdiff-backup --list-at-time 5D out-dir/subdir

   

• The first command below compares the current files in out-dir (which is on a remote computer) with the files in in-dir, displaying which ones have changed. The second command is similar but compares in-dir to out-dir as it was 2 weeks ago.

  rdiff-backup --compare in-dir user@host::out-dir
rdiff-backup --compare-at-time 2W in-dir user@host::out-dir

   

• rdiff-backup writes one statistics file per session to the out-dir/rdiff-backup-data directory. An average of the files can be displayed using the --calculate-average option and specifying the statistics files to use.

  rdiff-backup --calculate-average out-dir/rdiff-backup-data/session_statistics*

   

• If you are having problems connecting to a remote host, the --test-server command may be useful. This command simply verifies that there is a working rdiff-backup server on the remote side.

  rdiff-backup --test-server hostname.net::/ignored

   

Miscellaneous other commandsGetting information about the backup directoryFile selection with include/exclude optionsDeleting older filesRestoringBacking up